Solder on the diode to the red wire (Look below for diagram) Strip those wires down to what ever length you feel comfortable with (Cut the red wire the shortest because the diode goes on this one) Strip the wire down to the 4 basic wires inside (Red, White, Green, and Black) You don't have to worry about this if you have a play and charge.Ĭut the USB with scissors keeping the male part and at least 6 inches of wire. OPTIONAL: Play and charge kit to sync controller to board anytime you want toīefore we go on, I have to warn you that you MUST sync your controller to the RF Module via Xbox before you move on.
So I've been wanting to play on my PC with my wireless controller, but Microsoft won't release the drivers to play on PC via play and charge, so I took matters in my own hands.Īn Xbox 360 RF Module (Ring of light board at the front of the Xbox)
This is my first tutorial on something neat I did today.
This was written entirely by halopro77 on First off, I did not write this tutorial nor do I take any credit for it at all.
